GSi GSS-U страница 4 Скачать руководство пользователя

Страница: 4 / 30

I. GENERAL SAFETY INFORMATION

SAFETY FIRST! The symbols shown identify

examples of the safety labels and signs to

be found on Inter

ystems equipment. They

are affixed to the equipment to warn of

danger to persons and of possible

equipment damage. These signs must

never be removed, tampered with, painted

over or obscured in any way. (See Page 4

for label locations.) If labels are damaged or

become unreadable, replacement labels are

available from Inter

ystems. The user must

institute a continuing program to instruct all personnel in safe operating and maintenance procedures, and to

insure that all safety devices, guards, and covers are intact and operable, and that all safety signs are legible.

Consult Inter

ystems before making any changes to the sampler or its operating environment. Careless

changes could result in death or serious injury to people, and reduce the performance and service life of the

equipment.

Never perform any service on this equipment or any other powered equipment until all power has been shut off

and locked out so that it cannot be restored without the consent and knowledge of the person who interrupted

power. Power includes electrical, fluid, mechanical, or pneumatic energy.

Never perform any service on this equipment without utilizing the required PPE (personal protective equipment).

Refer to the MSDS(s), material safety data sheet(s), on all the products to which this equipment is in contact with

to determine what PPE is required.

DANGER

THIS EQUIPMENT IS TO BE OPERATED ONLY ON THE VOLTAGE DESIGNATED ON THE

CERTIFIED ELECTRICAL DRAWING(S)! FIRE OR EXPLOSION MAY RESULT, WHICH CAN

CAUSE DEATH, SERIOUS INJURY, AND EXTENSIVE DAMAGE TO EQUIPMENT. DO NOT

CONNECT TO VOLTAGES OTHER THAN DESIGNATED.

Содержание GSS-U































Результаты поиска

Содержание GSS-U

Отзывы:

Похожие инструкции для GSS-U

Бренды по названию

Популярные бренды

GSi GSS-U, Руководство пользователя

Результаты поиска

Содержание GSS-U

Отзывы:

Похожие инструкции для GSS-U

Бренды по названию

Популярные бренды