GSi GSS-U страница 30 Скачать руководство пользователя

Страница: 30 / 30

VIII. WARRANTY

Inter

ystems reserves the right to make changes in design or in construction of equipment and components

without obligation to incorporate such changes in equipment and components previously ordered.

WARRANTY, LIMITATION OF LIABILITY, DISCLAIMER OF IMPLIED WARRANTIES: Inter

ystems

manufactured equipment and components are guaranteed against defects in workmanship or materials for one

year from date of shipment. The obligation of Inter

ystems with respect to any goods is limited to

replacement or repair of defective parts and equipment provided those parts are returned, shipping costs prepaid,

to Inter

ystems' factory and provided the product has not been subject to misuse, negligence, or accident, or

repaired or altered outside of our factory, or other than by an Authorized Service Representative. This warranty

does not cover the replacement of parts inoperative because of wear occasioned by use, the cost of replacing

parts by a person other than an Inter

ystems employee or an Authorized Service Representative, or the

adjustment of a product where the product was improperly adjusted by the purchaser. In addition, this warranty

does not cover components manufactured by others such as motors, drives, clutches, cylinders, valves, blowers,

and the like. On those components the standard Manufacturers' warranty applies. In any event, liability is limited

to the purchase price paid, and Inter

ystems will, under no circumstances, be responsible for special or

consequential damages, or for incidental damages.

INTERSYSTEMS NEITHER MAKES NOR AUTHORIZES ANY WARRANTY OTHER THAN AS HEREIN

CONTAINED. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Содержание GSS-U































Результаты поиска

Содержание GSS-U

Отзывы:

Похожие инструкции для GSS-U

Бренды по названию

Популярные бренды

GSi GSS-U, Руководство пользователя

Результаты поиска

Содержание GSS-U

Отзывы:

Похожие инструкции для GSS-U

Бренды по названию

Популярные бренды