GSi GS-PTZ-1010, Руководство пользователя

Страница: 24 / 30

23
(I) When the spherical device executes the function of “patrol inspection”,
the default status is as follows:
a. Automatically scan from pre-set point No. 1 to 16, one by one. If some
points are not pre-set or canceled after pre-setting, they will not be
scanned during the “patrol inspection”;
b. The detention time between two pre-set points is 3 seconds;
(II) When the spherical device executes the function of “line scan”, the
default status is as follows:
a. The spherical device scans automatically between the two specified
positions;
b. The detention time between the “starting point” and “ending point” is 3
seconds;
c. If the starting point and ending point are coincided, the cradle head
rotates 360
；
(III) Mark “*” indicates some video cameras have such function.
(5.) Special function
(5.1) Function of speed limiting
There is a built-in speed limiting function in the video camera. In the
manual mode
,
the max. rpm of the clouds terrace reduces with the
increasing of the lens magnification of the video camera to let the user see
the object far away clearly
.
This function does not interfere the speed during
using the pre-set points
.
(5.2) Power failure status protection
When the spherical device is under line scanning or tracking mode, if the
power fails suddenly, the spherical device preserves the status before power
failure. When re-power again, it can operate the line scanning or tracking
status before the power failure. If the line scanning did not use the tracking
before the power failure
,
the spherical device can automatically stop at the
No
.
1 pre-set point
.