GSi GS-PTZ-1010, Руководство пользователя

Страница: 20 / 30

Note: the control line can be connected in parallel with several high
speed spherical video cameras, but with the 10th place of the code dialing
address of the furthest one at ON to connect one 120
Ω compensation resistor.
Thus, its control distance is far and also needs the operation mentioned above
as shown in the right figure.
The 10th place of the code dialing is at ON position, while other code
dialing switches should be put at the corresponding positions according
to the address numbers.
3.4 The protocol code setting
The protocol of this spherical device can be selected through a
five-figure code dialing switch as shown in the right figure. The specific
code dialing mode of the protocol is as follows:
2400
19