D-0100778 Rev C
39
Scorer / Timer
The Correct, Clear and Incorrect pushbuttons are used for scoring results in
Speech, QuickSIN, BKB-SIN and SISI tests. The scorer is displayed in the test
status area of the Status screen. When Speech, QuickSIN, BKB-SIN or SISI is
selected, the scorer initializes to 0/0 = 0%. The operator presses the Correct or
Incorrect pushbutton after each presentation to score the evaluation. The display
clears with the pressing of the Clear pushbutton.
During Tone Decay tests, the Scorer/Timer pushbuttons may be used to start,
pause, stop and clear the timer. The timer is displayed in the test status area of the
Status screen. The timer may be set to stop at 1, 2, 3 or 4 minutes. The timer may
be paused and resumed at any point by pressing the Pause pushbutton. Pressing
Stop will stop the timer, but leave the current time displayed. Pressing Start will
reset the timer to 0:00 and restart the timer.
NOTE:
The timer may also be started by pressing the patient response button in
the Tone Decay test. The timer will be active as long as the patient response
button is depressed. When the patient response button is released, the timer will
be paused and may be resumed by pressing and holding the patient response
button again.
In Pure Tone testing, if the Incorrect/Stop button is pressed instead of the Store
button the No Response (NR) symbol is stored and displayed on the current
frequency and intensity on the audiogram.
Aux Intercom
When the AUX Intercom button is pressed, there may be direct communication
between the Operator and an Assistant. The assistant monitor headset allows the
assistant to monitor signals being delivered to the patient with the same settings
as the operator’s Microphone / Monitor headset. The Aux Intercom can be
configured as a toggle with the Configuration Application software. The button
may also be disabled from the Configure button on the device.
Icon
Description
Front
Panel
Configuratio
n
Examiner, Ch1 and Ch2 sounds can
be heard by the assistant
On
Checked
Ch1 and Ch2 sounds can be heard by
the assistant
Off
Checked
No sound goes the assistant monitor
headphones
On/Off
Unchecked
