30
PNEG-1020 Bin Sweep Auger
Operation
7. OPERATION
7.1 Operate the Bin Sweep Auger
Keep out of the bin while the bin sweep auger is in operation. The rapidly moving sweep auger can
cause SERIOUS INJURY or DEATH!
1. Start the bin unloading equipment before starting the bin sweep auger.
Note: The bin sweep auger will work toward the floor. When it reaches the floor, it should
empty the bin in one (1) revolution.
2. Shutdown the auger as soon as the bin is empty.
3. Remove the sweep auger from the bin before refilling the bin.
Note: The shield must be adjusted to clear the floor at a minimum of 1/2" to allow the
sweep wheel to move the sweep properly into the grain.
DO NOT leave the bin sweep inside the bin during filling.
NEVER enter the bin while the bin sweep is in operation.
NEVER attempt to control the operation of the bin sweep by depressing the operating controls with
shovels, brooms or any other objects other than your hands.
DO NOT attempt to restrain movement of the bin sweep with ropes, bars or other devices.
Never allow an operator to manually restrain the bin sweep.
WARNING
WARNING
