Chapter 2: Installing the Front Platform
7. Using only the
outside
set of holes in the corner brace brackets (19), install them to the corners of
the platform support brackets (14) at the rear side of the platform using 5/16 x 3/4 in. flange bolts (3)
and 5/16 in. flange nuts (10).
8. Using both set of holes in the corner brace brackets (19), install them to the corners of the
platform long support brackets (15) and platform support brackets (14) at the middle of the platform
using 5/16 x 3/4 in. flange bolts (3) and 5/16 in. flange nuts (10).
9. Install the angle support brackets (18) to the corners of the hitch supports (11) using 5/16 x 3/4 in.
flange bolts (3) and 5/16 in. flange nuts (10).
Figure 2-3
Installing the corner braces
3
5/16 x 3/4 in. flange bolt (S-6606)
15
Platform long support bracket (D01-3573)
10
5/16 in. flange nut (S-10268)
18
Angle support bracket (D01-2771)
11
Hitch support (D01-3578)
19
Corner brace bracket (D01-3069)
14
Platform support bracket (D01-3572)
14
PNEG-2237
Stack Quiet Dryer Front Platform Assembly