18
Operation Instructions
Phase 7 - Downloading Configuration
Phase 6 - Configuring Access Levels
Step Description
Access Levels are controlled by creating UserGroups and assigning the
UserGroup to a User as described in section ‘Configuring Users’.
1.
UserGroups
are created by combining pairs of
DoorGroups
with
Timezones
. Each UserGroup can have up to 6 pairs of DoorGroups and
Timezones. Select DoorGroups and Timezones from the drop-down menus
to add to the current UserGroup.
2.
Timezones
are the periods of time for each day of the week that access
will be granted. Select times and tick the days of the week this time is valid.
4 time periods can be created for each timezone. Select ‘Holiday Access’
to grant access for holiday periods. Double click on the ‘Holiday Access’ to
add days to the holiday periods. Use the calendar to select these days.
3.
DoorGroups
are created by grouping doors together. e.g. all the entry and
exit doors could be grouped together as ‘Peremiter Doors’. Select a Door
from the ‘All Available Doors’ window and drag it to the ‘Doors in Current
Group’ to add it to the Door Group. Repeat for adding doors as desired.
Step Description
After all users, access levels and door control settings have been finalised,
a full download to the controller should be carried out.
1. Go to the ‘Settings’ tab and click on ‘Download Configuration’. A pop-up
window will appear, tracking the status of the download. All settings will be
downloaded to the Controller and Door Controls.
19
Operation Instructions
Enrolling User Fingerprints
Step Description
Note: Make sure the USB Fingerprint reader is attached to the PC
1. On the Users Tab , Select a User for fingerprint enrolment
2. Click on the ‘Fingerprints’ button.
3. Click on ‘+’ button to begin and place finger on the enrolment reader. An
image of the fingerprint will appear on the screen. Ensure that the image
quality is good and a value of at least 90% is achieved. Refer to section
‘Finger Placement’ for correct finger placement and example of good
quality image. Repeat this process if this is not achieved on first attempt.
Two fingerprint templates can be saved for each user.
4. Click ‘Save’ using a good quality template only. Poor Quality templates can
lead to false rejections later when trying to gain access .
