GSC Golf Skate Caddy, Руководство пользователя

Страница: 17 / 20

TROUBLE SHOOTING TIPS
The indicator light on the charger is
red.
Recharge the GSC™ until the light turns
green.
If the light stays red, your batteries may be dead and cannot be recharged. Don’t
forget it can take up to 3-5 hours of solid charging, before the red light on the
charger goes out.
Also, check the wiring of the battery, make sure that all wires are connected in the
battery box and none have been broken loose.
If the charger light won’t go red when plugged into the battery, the charger may
be broken and need replacement. Contact us and we’ll ship an immediate
replacement If still under warranty.
GSC™ and Controller do not
synchronise properly. Refer to
synchronization steps above.
Turn GSC™ and Controller OFF.
Turn GSC™ ON, and turn Controller
ON. Wait 10-15 seconds to establish
connection.
No beep heard when turning on Controller.
Batteries are not properly installed, or are flat. Replace the batteries in the
Controller.
GSC™ stops automatically after
running for some time.
Let the motor cool down for a bit (air
cool in the shade. Never pour water on
the motor), then, turn your GSC™ and
Controller back ON, and you’re ready to
ride again.
Have you been running your GSC™ really hard? There’s a protection system built-
in to your GSC™. This will activate when the motor becomes too hot or has been
overloaded.
Page 15.
SYNTHETIC GRASS COVERING:
• The Golf Skate Caddy has a synthetic grass covering. Due to excessive wear it may
be necessary to replace this.
• Remove Golf skate Caddy aluminium frame by undoing the lock bolts from the
underside of the GSC.
• Peel back the synthetic grass covering and replace with new covering.
• Replace aluminium frame and tighten up the bolts to a firm pressure.
Always ensure that you check for loose bolts and tighten accordingly.