GSC Golf Skate Caddy, Руководство пользователя

Страница: 11 / 20

If allowing younger, or inexperienced riders on your GSC™, always restrict the
speed, using the dual-stage switch.
Once the dual-stage switch is set, turn the GSC™ ON. Then, turn ON the Wireless
Controller.
After both are switched on, you’ll hear a beeping sound. This means the Wireless
Controller is establishing a link with the GSC™. When the beep stops, you’re
locked-on and ready to ride.
Remember to begin slowly and keep your speed down until you develop a good feel
for handling the throttle and braking system. Don’t stop reading here! There’s more
to know about your GSC™. Read on...
ABOUT THE WIRELESS CONTROLLER
The Wireless Controller links up with the GSC™’s receiver and regulates the speed
of the GSC™ Pulling the trigger towards you will progressively accelerate the
GSC™. Releasing the lever will return it to the neutral position, allowing you to
coast along. Pushing the trigger away from you will engage the braking system.
On top of the trigger is a micro switch with a “zero” neutral position, “fwd” & “rev”.
Press button to “fwd” position to move GSC™ forward. Press button towards “rev”
position to move the GSC™ backwards. Please note when moving forward or
backwards you have to come to a complete stop before you can select the opposite
direction of movement. Failure to come to a complete stop will not engage the new
direction and may cause an accident or loss of control.
To prolong battery life, your wireless controller features an automatic shut-off.
To re-establish a link with the GSC™ simply switch the controller of to zero position,
wait 1 second then switch back to forward or reverse position as desired.
Page 9.