gs yuasa SLR-1000, Инструкция по эксплуатации

Страница: 7 / 26

４
CAUTION

Do not use batteries in the areas that they would get exposed to direct sunlight, as this
may cause the deterioration of the batteries.

Do not allow the batteries to come into contact with seawater. If this happens, the
batteries may be damaged or catch on fire. It may also cause the corrosion of the
terminals and connecting plates (or wires).

Do not use batteries near a heat-generating device. Doing so may cause the
breakage or deterioration of battery life and performance.

Do not use the batteries in a dusty area, as dust may cause short-circuiting.
As a general rule, batteries are stored in metal case which GS Yuasa designated. By necessity, use it
anything other than GS Yuasa designated metal case, please be careful about following points.
1. Please take into consideration temperature increase of battery when designing the
cubicles/cabinet.
2. When placing more than two batteries side by side, leave 1mm to 2mm between the batteries, as
this improves heat release.
3. If batteries are installed in multiple stairs, which are more than 2 stairs, consider the placement of
the batteries to minimize the temperature variation between the top and bottom batteries and
make sure to have good ventilation as well.
If the batteries are to be used for cycle use as a stored electrical energy system as well as
emergency power supply for emergency use, please consult GS Yuasa group.
Batteries should be placed in the lowest part of the equipment when mounted.
Do not install electric switches that may cause sparks near the batteries.
3.4. Installation Area
WARNING
Do not install batteries in the areas where they may come in contact with
water. If the batteries come in contact with water, an electric shock or fire
may occur.
3.5. Installation Method
CAUTION
Please take precautions when carrying the batteries to avoid back pain and injury.