Gryphon Zena, Руководство пользователя

Страница: 9 / 24

9
Burn-In and Warm-Up
Your Gryphon unit has been thoroughly tested and burned in before
shipping. Performance will continue to improve during the first 40
–
50 hours of normal use. After this period optimum performance will
be reached approximately 45 minutes after turn-on. With the
exception of Class-A power amplifiers, we recommend leaving your
Gryphon components powered up at all times.
Menu-activated functions
The Gryphon Zena incorporates several functions which are
accessed via a Menu system.
To access the Menu, press Menu. MENU will appear in the display.
Exit will blink. To enter the menu, press input up/down and then
monitor. The Zena will mute its outputs.
If you do not wish to access the menu-controlled functions, press
Monitor when exits blink. You will then return to normal playback
mode and default display.
When you enter the Menu, NAME INPUT will appear in the display.
Press Menu again to move through the menu-con-trolled functions in
the following order:
Name Input - Change Max Level - Change Start Level - Brightness -
Input level match
– Green Bias Setup - Dedicate input 3 to AV -
Restore Settings - Continue/Exit
At the end, you can either continue from the beginning of the list or
exit the Menu. To return to the top of the list, press Monitor and NAME
INPUT will appear in the display. To exit the Menu, press an Input
button so that EXIT blinks in the display, then press Monitor to return
to normal playback and to the normal display. Any settings which you
have changed are automatically stored in memory.
Naming Inputs
You can assign a specific name to each input, either a pre-
programmed standard name or a custom name of your choice of up
to 8 characters. When NAME INPUT appears in the display, press
Monitor. SELECT INPUT: 1 will appear in the display. To choose a
different input for naming, press an Input button to move up or down
through the five inputs. When the number of the input which you wish
to name is displayed, press Monitor. CUSTOM will blink in the
display. If you wish to create a custom name for the input, press
Monitor and skip to section 1.a. below. If you wish to select a name