Gryphon Zena, Руководство пользователя

Страница: 11 / 24

11
appears in the display, press Monitor. MAX LEVEL: and the currently
assigned maximum volume setting will appear in the display. To
change this setting, press Volume Up or Down until the desired
maximum volume level is displayed. Press Monitor. The selected
maximum volume setting is now stored in memory. CHANGE MAX
LEVEL will appear in the display. Press Menu to select the next
menu-controlled function.
Setting Start-Up Level
You can select and store in memory a default volume level (between
00 and 26) which will automatically be set by the amplifier each time
you turn it on. When CHANGE START LEVEL appears in the display,
press Monitor. START LEVEL: and the current default start level will
appear in the display. To change this setting, press Volume Up or
Down until the desired start level is displayed. Press Monitor. The
selected start level is now stored in memory and will be set each time
you turn on the amplifier. CHANGE START LEVEL will appear in the
display. Press Menu to select the next menu-controlled function.
Setting Display Brightness
You can select and store in memory the desired level of brightness
in the front-panel display. When BRIGHTNESS CONTROL appears
in the display, press Monitor. 100% will appear in the display. Choose
between 100%,75%,50%,25% and Off. Press an Input button
repeatedly until the desired level of brightness appears. The display
will immediately change to the selected brightness, unless you have
selected OFF. If OFF is selected, the display will turn off after you exit
the Menu. Press Monitor. The selected brightness level is now stored
in memory. BRIGHTNESS CONTROL will appear in the display.
Press Menu to select the next menu-controlled function.
NOTE: When the display is turned completely off, pressing any button
on the front panel or on the remote will cause the display to turn on
briefly so that you can see the current volume level and selected
input. Press a second time to activate the desired function.
Input level match
Within the level match menu, you must choose the input that you wish
to adjust. This is done with the input up/down buttons.
After you have selected your input you can increase the level in 2dB
steps from 0 dB - 8dB.
Default is 0 dB on all inputs.