Gryphon Zena, Руководство пользователя

Страница: 12 / 24

12
Green Bias set up
Within the Green bias set up menu you can choose the following
settings:
Low setting:
Vol. 00-09 Bias low
Vol. 10-19 Bias medium
Vol. 20-42 Bias high
High Setting:
Vol. 00-15 Bias low
Vol. 16-25 Bias medium
Vol. 26-42 Bias high
Assigning Input 2 or 3 as a Dedicated AV Connection
You can use the Zena with a stereo power amplifier in a normal stereo
set-up but using a separate surround processor.
Connect the left and right front channels from your surround
processor to either Input 2 or Input 3 of the Zena and use the Menu
to configure this input. The Zena will then be set to a fixed volume
level (0dB) when selecting this dedicated AV input. This allows you
to enjoy the full performance of the Zena for stereo and surround
sound listening without placing any sound degrading components in
the stereo signal path.
CAUTION: When Input 2 or 3 is set up as a dedicated AV connection,
the Zena gain is automatically set to 0dB. The signal from the
surround processor is NOT attenuated by the Zena and MUST be
calibrated and attenuated by the surround processor.
When DEDICATE INPUT TO AV appears in the display, press Menu
to select the next menu-controlled function, if you do NOT wish to
connect the left and right front channels from a surround processor
to Input 2 of the Athena.
If you do wish to make a dedicated AV connection to either Input 2 or
Input 3, press Monitor at the relevant function.
“INPUT: none” will appear in the display. Press INPUT UP or DOWN
touch button to select between INPUT 2 (XLR) or 3 (RCA). Confirm
your selection by touching the MONITOR button.
WARNING! NO ATTENUATION will blink in the display for 5
seconds, after which you will be asked to confirm that you wish to
configure this input as a dedicated AV connection. ARE YOU SURE?
will appear in the first line of the display. NO and YES will appear in
the second line. NO will blink. If you do NOT wish to make a dedicated
AV connection, press Monitor while NO is flashing, then press Menu
to select the next menu-controlled function.