TESTS CEI EN / IEC 61215 and CEI EN / IEC 61730- 2
The objective of the test sequence was to determine the electrical and thermal characteristics of the
GruppoSTG Fabbrica Srl
module and demonstrating that the
GruppoSTG Fabbrica Srl
module is capable
of withstanding prolonged exposures in climatic conditions similar to those described in the field of
application of the standard by covering almost all climatic conditions possible in normal operation. In
addition, possible extra loads such as snow, wind and ice are considered, thus providing for extreme
electrical conditions. The tests proposed by both the standards, of type electrical, thermal and
mechanical, simulate, in complex an aging accelerated of modules comparable to the effect of 20-25 years
of exposure in conditions real of operation in order to verify the stability in time.
In practice, the modules that exceed positively the tests have a time of life guaranteed for 20-25 years.
List of tests :
Try to cycle thermal moisture and freezing
Test of resistance to fire
Electrical insulation test
Test of resistance to the Hot Spot
Try to cycle heat to warm wet
Test of strength
Try to exposure outdoors
Performance at low irradiance
Hail test
Load mechanical test (snow and ice)
Test of insulation in ambient wet
Try to cycle heat on the diode of by-pass
Test of insulation electric
Try to break
Try to overload the current reverse
Try to cut
