Grünwelt Maschinen Grunwelt GW-140FC, Руководство пользователя

Страница: 43 / 84

6. Maintenance
14
Periodic inspection and service
The following table is given as a guideline for periodic maintenance procedures. These inspections
and services are recommended for outboard motors used on an average of 20 hours per month.
Depending on operating conditions, the intervals between maintenance procedures may need to be
changed.
Services / Intervals
1 month 3 month 6 month 1 year 2 years
Run engine in fresh
water
o
Fuel filter: check &
clean
o
Spark plugs: check
condition & change if
necessary
o
Propeller: Pull off &
clean propeller shaft
o
Zinc anode: Pull off &
scrub
o
Engine head: flush w/
fresh water, clean,
spray crc, grease
o
Engine lubrication:
grease the specified
points
o
Fuel tank: clean w/
detergent & fresh water
o
Crankcase: drain &
refill w/ oil
o
Impeller: replace
impeller & grease
crankshaft
o