22
INFORMATION
__________________________________________________________________________
Possible causes
Aerial cable
No TV channel programmed
Picture settings adjusted wrongly
Problem is with the transmitter
Malfunctions caused by other appliances
Channel settings
Aerial
Colour intensity set to mininum
TV standard setting (if setting options
available)
Problem is with the channel
Strong magnetic field from speakers or
similar
Volume set to minimum
Headphones connected
Problem is with the channel
TV channel (has no teletext) or aerial
system
Transmission signal too weak
No optical connection
Remote control batteries
Undefined operating status
Child-proof lock is activated
Remedy
Aerial cable connected?
Start automatic channel search
Adjust settings for brightness, contrast
and colour
Test another channel
Change the position of the appliances
Automatic or manual
channel setting/fine tuning
Have aerial cable or aerial system
checked
Raise the colour setting
Select the correct colour standard
Test another channel
Increase the distance between the
speakers and the TV set
if the coloured spots remain, turn the TV
set off at the mains and turn on again
after 10 minutes
Increase/switch on volume
Remove headphones
Test another channel
Check another channel, fine tuning,
ghosting
Check aerial system
Direct remote control at the TV set
Check/replace batteries
Turn TV set off with the main power
button for approx. 2 min
Enter PIN or digit combination »7038«
Malfunction
Picture bright (interference) but no pro-
gramme visible
Picture contrast poor
Picture and/or sound disturbed
Ghosting, reflection
No colour
Wrong colours, coloured flecks
Picture visible, no sound
No teletext, or teletext is disturbed
Remote control not working
After switching on, Child-proof lock
menu appears
Rectifying malfunctions
If the remedial measures listed below do not lead to a satisfactory result, please consult a GRUNDIG
authorised dealer. Please consider that problems can also be caused by external appliances, such as video
recorders and satellite receivers.
In the case of misadjusted picture values, it may help to reset the TV set to the factory settings: to do this, press
»
i
« and then »
OK
«.
