Grundig Sonoclock 680, Руководство пользователя

Страница: 4 / 6

Switching the radio on and off
• Switch the radio on with the ON/OFF button.
Button depressed = ON
Button not depressed = OFF
– The red LED under the display indicates that the unit is on.
– The first time you switch your radio on, the display
indicates 87,50 MHz (if the band selection switch is in FM)
or 531 KHz (if the band selection switch is in AM).
Note: The display indicates the frequency for about 5
seconds and then it returns to normal time indication.
• To display the frequency, briefly press the DOWN/HR or
UP/MIN button once.
– Your unit is provided with the function 'LAST STATION
MEMORY', which means that the station that was playing
when the set was switched off will be selected again when
the tuner is switched back on.
• Adjust the volume with the rotary control VOLUME.
• When you want to switch the unit off, simply press the
ON/OFF button again.
Radio reception
• Select the waveband with the switch FM/AM .
Automatic tuning
• To activate automatic station search (AUTO TUNING), press
DOWN/HR or UP/MIN until the frequency display begins
'to run'; then release the button.
– The search stops as soon as a station is found and tuned to.
– Stations which are received with a weak field strength may
be skipped.
These can be tuned to manually.
Manual tuning
• Briefly press the DOWN/HR or UP/MIN button to tune in
the corresponding direction in individual steps.
• If you keep the button depressed, you can rapidly scan large
frequency ranges. When you release the button, AUTO
TUNING is automatically switched to.
• If you briefly press one of the DOWN/HR or UP/MIN
buttons, manual tuning is automatically switched to.
Note: After tuning to a station, the display indicates its
frequency for about 5 seconds and then it returns to
normal time indication.
Antennas
The wire antenna at the back of the set is used for FM
reception.
• Position the wire antenna so that optimum reception is
obtained.
For AM reception there is a built-in ferrite rod antenna.
• Rotating the unit slightly can improve reception.
Station memory
There are 10 memory locations available for storing stations in
each band.
• Tune to the station you want to store .
• Press
MEMO/SET .
– 'MEMORY' lights up on the display.
• Press the number ( 1…10 ) you want to assign the station to.
• If you want to assign the station to memory location
numbers 6 to 10, press MEMO/SET , then SHIFT , then the
appropriate number button.
– 'MEMORY' disappears from the display and the number you
have pressed appears to the right of the frequency.
Calllng up a stored station
• To call up a stored station, simply press the corresponding
button.
• If you call up a station which is assigned to memory
location numbers 6 to 10, first press SHIFT , then the
appropriate number button.
– The unit switches to the station and the display indicates the
frequency, the band and the memory location number.
'LAST STATION MEMORY'
LAST STATION MEMORY means that the unit 'remembers' the
last station that was tuned to.
This function ensures that the station which was selected
before the radio was switched off is automatically selected
again when your radio is switched back on.
KHZ AM
5
1 1 7 0
MHZ FM
8
1 0 6 0 .
MHZ FM
1 0 6 0
MEMORY
.
MHZ FM
8 7 5 .
KHZ AM
5 3 1
RADIO OPERATION
10