Grundig SM 3330, Руководство пользователя

Страница: 11 / 13

11 ENGLISH
INFORMATION­ ___________________________
Tips­for­blending
█
To add food while the blender is operating,
remove the cap
A
and drop the ingredients
through the opening. Be sure to cut the food
into about 2-5 cm pieces to fit through the
opening. Replace the cap
A
when you have
finished adding ingredients.
█
When blending solid food, such as raw veg-
etables, cooked or uncooked meat and fruits
always cut them into no larger than 2-5 cm
pieces before placing them into the plastic jug.
Blend no more than 2 cups of these food at a
time. This will speed the blending process and
reduce wear on the blending blades.
█
Always place liquid ingredients in the plastic
jug first, unless a recipe specifically states oth-
erwise.
█
To blend beverages, place all ingredients in
the plastic jug at the same time.
█
Avoid overblending. Usually, you will need to
blend for a few seconds.
█
Overblending may cause food to become
mushy.
Cleaning­and­care­
Caution­
█
Never use petrol, solvents, abrasive cleaners,
or metal objects and hard brushes to clean the
appliance.
█
The blades of the cutter unit are very sharp!
Handle the blades with utmost care in order to
avoid injuries.
█
Never clean the appliance with your bare
hands.
█
Clean the jug blender after each use. Do not
let any food remnants harden on and inside
the jug blender. This will make it more difficult
to clean it later.
█
Do not use boiling water. The blade assembly
bearings have been designed with a lifetime
lubricant; exposure to boiling water may dam-
age these bearings and shorten the life of the
blender.
1­­
Turn the appliance off and disconnect it from
the wall socket.
2­­ Allow the appliance to cool down.
3­­ Remove the plastic jug
D
from the motor hous-
ing
F
. Rinse with water to remove any large
food particles that may have accumulated in
the plastic jug.
4­­ Replace the plastic jug
D
on the motor
housing
F
.
5­­ Place 1 to 1 ½ cups warm water with some
drops of mild cleanser into the glass jug
D
and switch to speed “2” for a few seconds.
Remove the plastic jug from the motor housing
F and rinse with water. Repeat as necessary.
Note­
█
Do not immerse the motorized base or blade
unit in liquid, or place them in the dishwasher.
Only the lid and the plastic jug may be im-
mersed and placed in the dishwasher.
6­­
Use a damp soft cloth and some mild cleanser
to clean the exterior of the appliance.
7­­ Wipe the blender base, cutter unit
F
and lid
with a lint free cloth before the next usage.
Storage­
If you do not plan to use the appliance for a long
period of time, please store it carefully. Make sure
the appliance is unplugged and completely dry.
Store the appliance in a cool, dry place. Make
sure the appliance is kept out of the reach of chil-
dren.