ENGLISH
17
Connection and installation
Connecting the mains cable
1
Plug the mains cable into the »
230 V 50/60 Hz
« socket on the back of
the device.
2
Insert the power cord plug in the socket.
3
For instructions on how to install the loudspeakers with a WT2 transmitter
please refer to the appropriate operating manual.
Switching on and operating after installation
1
Switch on both loudspeakers with »
Z
«.
– The orange indicators on the loudspeakers light up (stand-by).
2
Switch on the television.
– The green indicators on the loudspeakers light up (operation).
Note:
The loudspeakers switch on or to stand-by mode automatically depending
on control signals from the WT2.
The change to stand-by function depends on the audio source and can take
up to 30 minutes.
CONNECTION AND OPERATION
_____________
MAINS
230V
50/60Hz
ǵ
