ENGLISH
15
OVERVIEW
________________________________________
The controls and connections for the RS-Set 2
Z
Power switch, on the top of the device: switches the
device on and off again.
The loudspeaker is only fully disconnected from the
mains after the plug has been pulled out.
I
Antenna.
Indicator
In the mains button:
Flashing orange: installation phase 1 (sending iden-
tification);
Flashing green: installation phase 2 (identification
acknowledged);
Continuous orange: the loudspeaker is in stand-by
mode;
Continuous green: the loudspeaker is in operation;
Flashing green and red: reset mode – the loudspea-
kers have not been installed. This display changes to
flashing orange after a few seconds (see Installation
Phase 1).
Flashing red: the protective circuit has been actua-
ted.
Note:
If the protection circuit is actuated, switch off the
loudspeaker using the »
Z
« button and let it cool
down for at least 15 minutes.
ǵ
