14
SET-UP AND SAFETY
_________________________________________________________________
MAINS
230V
50/60Hz
Positioning the active loudspeakers
There are two options for the RS-Set 2: wall-mounting or placing them on the
floor, on furniture or shelves.
1
Place the active loudspeakers in the room around the television;
– or
hang the loudspeaker by the recess on the back of the speakers on a screw
which has been firmly anchored in the wall.
Note:
We recommend using the RS-Set 2 active loudspeaker as the rear loudspea-
ker. The LSP2 active loudspeakers can then be used as the front loudspea-
kers.
The rear loudspeakers should be placed at a sufficient distance and a suitable
height to the left and right or behind the listener. When setting up the active
loudspeakers, note that the minimum distance to the television is 50 cm.
When setting up the active loudspeakers, make sure that they stand securely
and are not affected by vibrations caused by resonance at high volumes.
Three feet are attached to the bottom of each active loudspeaker to increase
stability. If you hang the active loudspeakers to the wall you can remove the
feet from the bottom.
