ENGLISH
35
Creating a track memory
You can create a track memory of up to 20 tracks for the current CD in any order you choose
and then play them back in that sequence. A track may be stored more than once. Program is
only possible in the stop position.
Selecting and storing tracks
1
Press »
PROG/MEM
« to call up the function.
– Display: »
00
« for the first preset position and »
MEMORY
« or »
MEM
« are flashing.
2
Select the track by pressing »
DOWN
8
« or »
UP
9
«.
3
Press »
PROG/MEM
« to save the track.
– Display: »
00
« for the second preset position and »
MEMORY
« or »
MEM
« are flashing.
4
To store more tracks, repeat steps
2
to
3
.
Playing back a track memory
1
Start the track memory by pressing »
PLAY/PAUSE
ı
II
«.
– Playback begins with the first programmed file or track.
2
Press »
STOP
7
« to end playback.
3
To play the track memory again, press »
PROG/MEM
« and afterwards »
PLAY/PAUSE
ı
II
«.
Changing the track selection
1
In stop mode, keep pressing »
PROG/MEM
« until the number of the track you want to
replace appears in the display.
2
Select the number of the new track by pressing »
DOWN
8
« or »
UP
9
«.
3
Press »
PROG/MEM
« to save the new track.
Adding tracks
1
In stop mode, press »
PROG/MEM
« until the preset number shown in the display is
zero.
2
Select the number of the new track by pressing »
DOWN
8
« or »
UP
9
«.
3
Press »
PROG/MEM
« to save the new track.
Deleting the track memory
The CD must be in the stop position.
1
Press »
OPEN/CLOSE
« to open the CD compartment;
or
– press »
PROG/MEM
«.
– press »
STOP
7
«.
– move the »
CD TAPE/OFF RADIO
« switch to the »
RADIO
« position.
– move the »
CD TAPE/OFF RADIO
« switch to the »
TAPE/
OFF
« position.
CD MODE (RRCD 2410/2420 MP3)
__________
