ENGLISH
31
Switching on and off
1
Switch on the device with the required input source by moving the switch »
CD
TAPE/OFF RADIO
« to the corresponding position.
2
Move the »
CD TAPE/OFF RADIO
« switch to the »
TAPE/
OFF
« position to switch off
the device.
Selecting the input source
1
Select the input source (CD or RADIO) using »
CD TAPE/OFF RADIO
«.
Adjusting the volume
1
Adjust the volume with »
VOLUME
«.
Switching the Ultra Bass System on and off
This function boosts the bass frequencies.
1
Switch the Ultra Bass System on and off with »
UBS
«.
Listening with headphones
1
Connect the headphones to the »
0
« headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
GENERAL FUNCTIONS
__________________________________
RADIO MODE
_________________________________________________
Antennas
1
For FM stations (VHF) extend the telescopic antenna.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic antenna.
2
The radio recorder has a built-in rod antenna for MW reception. Turn the radio recorder
about its own axis to point the antenna.
Selecting the radio input source
1
Move the »
CD TAPE/OFF RADIO
« switch to the »
RADIO
« position.
Setting and storing radio stations
Automatic station search
1
Select the frequency band (FM or MW) using »
7
BAND
«.
2
Activate the station search by pressing »
PROG/MEM
« until the frequency display
changes to rapid run-through.
– The device searches for up to 10 radio stations and then saves them. After the search
has finished, the station stored in position 01 can be heard.
