Display
1
STATION NUMBER seven-segment display
This shows the number of the selected memory location (1 to 59 as either
one or two digits
2
ɳ
– This indicates that the tuner is receiving FM stereo broadcasts
3
;B
– This indicates that the CD is in playback or in pause mode.
4
TUNED
– This indicates that the unit is optimally tuned to a station
5
Signal strength
– The more dashes you can see, the stronger the
reception of the station you have tuned to.
6
14-segment display
– for frequencies in MHz (FM) or kHz (MW),
(RDS) station name, radio text, names you have assigned or the selected
programme type.
7
PROGRAM
– This indicates that the CD is in programme mode.
8
SHUFFLE
– This indicates that the CD is playing tracks in random order.
9
ANTENNA
– comes on when the antenna attenuator is not switched on.
0
REPEAT
– This indicates that the CD is in repeat mode.
!
CABLE
– comes on during broadband cable reception if the antenna
attenuator is switched on with the
ANTENNA/CABLE
button.
@
REMAIN
– This lights up when the remaining time indication for the CD
player is selected.
#
TOTAL
– This lights up when the total time indication for the CD player is
selected.
Remote Control
Changing the batteries
If the range of your infrared remote
control seems to decrease, or if
certain individual functions can no
longer be carried out, you should
replace the batteries.
Two 1.5 Volt LR06 size AA are
required. To change the batteries,
open the compartment on the back of
the remote control. Ensure that the
batteries are inserted properly (note
the markings in the compartment).
And in the interest of the environment:
Remember that batteries must always
be disposed of properly.
GENERAL
y
– This button is used to switch the unit to STAND BY.
SLEEP
– this button is used to call up the sleep timer function.
Ǻ
– This button is used to toggle the display modes of the active source.
ĭ
– This button is used for muting the speakers.
/–
– These buttons are used for controlling the volume of the
receiver.
TAPE
– This button is used for selecting the TAPE input.
TUNER
TUNER
– ThIs button is used for selecting the tuner (radio)
PTY
– This buttons are used to select the programme type.
STATION
1 2
– These buttons are used for selecting stations
CD
CD
– This button is used for selecting the CD player.
;
– This button is used to switch the CD player to PAUSE.
9
– This button is used to switch the CD player to STOP.
B
– This button is used to start playback of the CD player
– DISC +
– This button is only used for a CD changer.
O P
– These buttons are used to select next or previous tracks on a CD.
RC 400
V O L U M E
-
+
T U N E R
S T A T I O N
T A P E
C D
S L E E P
P T Y
D I S C
–
+
PROGRAM
ANTENNA
########
MHz
1
2
0
@
#
9
!
6
kHz
88
SHUFFLE
REPEAT REMAIN
TOTAL
CABLE
TUNED
5
4
7
8
3
©
17
Display
Remote Control
GB
