SETTINGS
___________________________________________________________________________
8
Programming the receiver modulator
Programming of the receiver modulator is effected exclusively via the keys of the
basic module carrier’s control unit.
The user is guided via the two-line display on the control unit.
1
The following menu items can be selected using the
MODE
button:
– Modulator (Box no.) and channel line A or B.
– Output cannel /fine tuning (offset)
– Input frequency including fine tuning
– Decoder (without function)
– IF bandwidth (wide, narrow, dx)
– Main carrier/subcarrier (Main/SubMono/Stereo)
– Carrier frequency (5.00…9.77 MHz)
– Various audio settings
– Volume adjustment
Note:
The following examples show the programming of the SAT receiver modula-
tor
PSAP 3000 VHF
; the output channels can be adjusted from
S3
to
S24
including
C5
to
C12
.
Select modulator (Box no. and Line A or B)
1
A few moments after switching the Headend station on, the access menu, e.g.
» Box 3A TWIN–SAT« appears in the control unit’s display.
2
Use the
+
or
–
button to select the desired modulator (Box no.) and the
desired Line »A« or »B« .
Select the output channel
1 Press the MODE button. The » OUTPUT: « menu appears in the display.
2
Press the
MULTI
button to call up the programmed output channels.
3
Use the
+
or
–
button to select the desired output channel.
Adjust the frequency offset (fine tuning)
Caution:
The frequency offset should only be changed in exceptional cases as otherwise
all TV sets connected to the cable system must corrected accordingly using the
fine tuning facility.
1
Press the
ı
button until »Fine 0« also appears in the display, and then use the
+
or
–
button to select a different value.
Press the
ľ
button to return to the initial setting.
Bx 3A
TWIN–SAT
C5–C12
C12
Bx 3A
OUTPUT:
C12
Fine
0
Bx 3
OUTPUT
C12
BE–Remote
V
.
19
PROFESSIONAL
