16
ACCESSORIES
___________________________________________________________________________
Installing the decoder retrofit kit into the cassette
Note:
Two decoder retrofit kits can be installed into each of the two twin SAT
cassettes: one for channel
LINE A
and one for channel
LINE B
.
1
Remove the cover from the top of the cassette.
2
Break out the corresponding pre-punched opening in the front side of the
cassette.
3
Plug one female connector of the flat ribbon cable into the corresponding
connector on the decoder retrofit kit.
4
Insert the decoder retrofit kit with the solder side up into the opening and fix
it with the screws enclosed.
5
Plug the other female connector of the flat ribbon cable into the corres-
ponding connector of the chassis board of the cassette.
6
Refit and fix the cover of the cassette.
Continued on next page.
DNS A
DNS B
Connector B
Connector A
