Grundig Music Boy 51 RP 5201 PLL, Инструкция по эксплуатации

Страница: 6 / 10

ENGLISH 14
Mains­operation
Check that the mains voltage on the type plate (on the
bottom of the device) corresponds to your local mains
supply. If this is not the case, contact your specialist
dealer.
1 Plug the mains cable supplied into the » AC­~ « so-
cket on the device.
LIFT
AC~
2 Plug the mains cable into the socket (230V~,
50/60 Hz).
Note:
7
If there are batteries in the device, these are swit-
ched off automatically during mains operation.
Caution:
7
The device is connected to the mains with the
power cord. Pull out the power cord when you
want to completely disconnect the device from
the mains.
7
Unplug the mains plug to disconnect the device
from the mains. Make sure the power plug is eas-
ily accessible during operation and not hindered
by other objects.
Battery­operation
You can also operate the device using standard batte-
ries (not supplied). In this case, you must disconnect the
mains power cable.
1 Open the battery compartment by pressing the area
marked with arrows on the drawing and pushing
down the cover.
LIFT
AC~
RESET
AC~
POWER­SUPPLY
­_____________________________________________________
2 Insert four batteries (4x1.5V, Type IEC, AM 2, LR
14, C size) according to the polarity marked on the
battery compartment.
Note:­
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heaters
or fire.
7
Remove the batteries when they are flat or when
you know that the device will not be used for
a long period of time. When the batteries are
low, a battery symbol appears and flashes in the
display. This function does not work when the
power cable is plugged into the device.
7
No liability is accepted for damage resulting
from leaking batteries.
Environmental­note:
7
Batteries, including those which contain no hea-
vy metal, must not be disposed of with household
waste. Please dispose of used batteries in an en-
vironmentally sound manner. Observe the legal
regulations which apply in your area.
Inserting­back-up­batteries
During mains operation, the back-up batteries ensure
that stored settings are not lost in the case of a power
failure or when the device is briefly disconnected from
the mains. If no main batteries are inserted and there is
no mains power supply, you have approximately 10
seconds to change the back-up batteries.
1
Open the battery compartment by pressing the
area marked with arrows on the drawing and push-
ing down the cover.
LIFT
AC~
RESET AC~
2 When inserting the batteries (micro type, e.g. AM
3, LR 6, AA size) in the small compartment, observe
the polarity marked on the compartment base.