Grundig Music Boy 51 RP 5201 PLL, Инструкция по эксплуатации

Страница: 8 / 10

ENGLISH 16
OPERATION
­ ___________________________________________________________
Switching­on­and­off
1 Press » ON/OFF « to switch the device on and off.
Radio­operation
For the best FM (VHF) reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting­stored­stations
1 Select the station you want using the preset buttons
» 1 , ­2 , ­3 , ­4 , ­5 « (preset stations 1 to 5) or using » +­
5 « and the preset buttons » 1 , ­2 , ­3 , ­4 , ­5 « (preset
stations 6 to 10).
Adjusting­the­volume
1
Adjust the volume using »
+­VOL­–
«.
Adjusting­the­tone
1 Adjust the tone using »
§
TONE­
!
«.
Displaying­the­current­time
1
Press »
MODE
« to briefly display the time.
– The display changes from the frequency to the
time and back.
Alarm­mode
Alarm­with­signal­tone
1
Press »
ON/OFF
« to switch off the device.
2 Set the alarm signal tone (» e «) on the right of the
device using » e
§
«.
3
Press »
ALARM
« to select the alarm function.
– Display: the current time and » e «.
4 Briefly press » MODE « to check the alarm time.
– Display: the set alarm time, » e « flashes.
– After a short time, the display changes to the cur-
rent time, » e « no longer flashes.
– The alarm goes on with a signal tone at the set
time.
Alarm­with­radio­station
1 Press » ON/OFF « to switch on the device.
2 Select the radio alarm (»
§
«) on the right of the
device using »
e
§
«.
3 Select the radio station using the preset buttons » 1 , ­
2 , ­3 , ­4 , ­5 « or using » +­5 « and the preset buttons
» 1 , ­2 , ­3 , ­4 , ­5 «.
4 Set the alarm volume using »
+­VOL­–
«.
5 Press » ON/OFF « to switch off the device.
6 Press » ALARM « to select the alarm function.
– Display: the current time and »
§
«.
7
Briefly press »
MODE
« to check the alarm time.
– Display: the set alarm time, »
§
« flashes.
– After a short time, the display changes to the cur-
rent time, »
§
« no longer flashes.
– The radio switches on at the set alarm time.
Briefly­displaying­the­alarm­time
1 With the device switched off, press » MODE «.
– The display changes from the clock to the set
alarm time, – display: »
e
« or »
§
« flash.
– After a short time, the display changes back to the
current time.
Interrupting­the­alarm
1 Press » SNOOZE « while the alarm is sounding.
– Display: » e « or »
§
« flash.
– The alarm (signal tone or radio) stops.
– The alarm goes on again at 5-minute intervals
(the total alarm time is 90 minutes).
Cancelling­the­alarm­for­the­day
1 Press » ON/OFF « while the alarm is sounding.
– Display: the current time and »
e
« or »
§
«.
– The alarm (signal tone or radio) stops, but the
alarm function remains activated for the next day
at the set time.
Cancelling­alarm­stand-by
1 Press » ALARM « to cancel alarm stand-by.
– Display: » e « or »
§
« disappears.
– The set alarm time is saved.
2 Press » ALARM « to re-activate alarm stand-by.
– Display: »
e
« or »
§
«.