Grundig GWN39430W, Руководство пользователя

Страница: 29 / 44

Adding and removing laundry
• Press Start/Pause button
to pause the machine. The
programme follow-up light of the
relevant step during which the
machine was switched into the
pause mode will flash.
• Wait until the Loading Door can
be opened.
• Open the Loading Door and add
or take out the laundry.
• Close the Loading Door.
• Make changes in auxiliary
functions, temperature and speed
settings if necessary.
• Press Start/Pause button to start
the machine.
Cancelling the programme
The programme is cancelled when the
machine is turned off and on again.
Press and hold On / Off button for 3
seconds.
C
If you press
On / Off
button when
the Child Lock is enabled, the
programme will not be cancelled.
You should cancel the Child Lock
first.
C
If you want to open the loading
door after you have cancelled the
programme but it is not possible
to open the loading door since the
water level in the machine is above
the loading door baseline, then
turn the
Programme Selection
knob to
Spin+Pump
programme
and discharge the water in the
machine.
End of programme
End Light turns on when the
programme is completed.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
Completed programme steps will be
displayed if you press On / Off button.
Your machine is equipped with
a "Stand-by Mode".
In case of not starting any programme
or waiting without making any other
operation while the machine is in the
selection step after it is turned on by
On/Off button or if no other operation
is performed approximately 10 minutes
after the programme you selected has
come to an end, your machine will
switch to OFF mode. Display and all
indicators are turned off. Information
related with the selected programme
will be displayed when you press On
/ Off button. Check the correctness
of your selections before starting the
programme. If necessary, make your
settings again. This is not a failure.
29
EN