24
• When the Child-proof Lock is
activated:
• Display symbols will not
change even if the position of
Programme Selection knob is
changed while the machine is
running or in halt.
6.12 Changing the programme
after it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, press and hold the
Start / Pause button for 1 second
to stop the programme.
2. Select Extra Dry programme
by turning the Programme
Selection knob.
3. Press the
Start / Pause button to
start the program.
Adding / removing laundry in Pause
mode
In order to add or take out laundry
after the drying programme has
started:
1. Press
Start / Pause button to
switch the machine to
Pause
mode. Drying process will stop.
2. While in
Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
3. Press the
Start / Pause button to
start the program.
C
Any laundry added after the
drying process has started
may cause the clothes that
are already dried in the
machine intermingle with
wet clothes and the result
will be wet laundry after the
drying process is over.
C
You may repeat laundry
adding or removing process
as many times as you desire
during drying. However,
this process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then the
current program is aborted
and new programme
information is displayed.
CAUTION: Do not touch the
inner surface of the drum
when adding or taking out
laundry while a programme
is running. Surfaces of the
drum are hot.
6.13 Cancelling the programme
If you want to stop drying and cancel
the programme for any reason after
the machine has started to run, press
and hold the
On/Off/Cancel button
for 3 seconds.
A
CAUTION: As the inside
of the machine will be
excessively hot when you
cancel the program while
the machine is running,
activate the ventilation
program to cool it down.