12
Activating the remote control battery
1
When using it for the first time, activate the remote control battery
by pulling out the film protruding from the battery holder.
Changing the battery
1
Pull out the battery holder.
2
When inserting the battery (3 V, lithium), make sure the positive
terminal (+) of the battery and the (+) sign on the holder are on
the same side.
3
Push the battery holder back into the remote control until it latches
into place.
Notes:
Do not expose the battery to extreme heat, caused for example
by direct sunlight, heaters or fire.
If the digital picture frame no longer reacts properly to remote
control commands, the battery may be flat. Always remove used
batteries. The manufacturer accepts no liability for damage
caused by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
Connecting the mains adapter
Note:
Check that the mains voltage on the type plate (on the back of
the mains adapter) corresponds to your local mains supply. If this
is not the case, contact your specialist dealer.
1
Insert the plug of the power supply unit into the »
DC
« socket on
the back of the device.
2
Plug the power supply unit into the mains.
Caution:
The device is connected to the mains with the power supply unit.
Unplug the power supply unit to completely disconnect the device
from the mains.
Unplug the power supply unit to disconnect the device from the
mains. Make sure the power supply unit is easily accessible
during operation and not hindered by other objects.
CONNECTION AND PREPARATION
----
