EN
GLISH
13
Connecting or inserting data media
Note:
Before inserting or connecting a memory card or USB memory
stick, switch off the digital picture frame with »
ON/OFF
«.
Switch the digital picture frame on again once you have con-
nected it up.
Even if you remove the memory card or USB memory stick, the
digital picture frame must be switched off, otherwise files can be
damaged.
Inserting a memory card
The digital picture frame supports memory cards in SD, SDHC,
MMC, MS and CF formats.
1
Regardless of the format, insert the card carefully into the
»
SD/MMC/MS
« or »
CF
« card slot (rear panel, left) with the
contacts facing to the rear until it latches into place.
Note:
Do not use excessive force when inserting the memory card. Only
apply slight pressure.
The memory cards are resistant to dirt and moisture, but may only
be inserted into the digital picture frame in a dry and clean con-
dition.
Never remove memory cards during operation. This can damage
the memory card. This type of damage will invalidate your
warranty.
Removing the memory card
1
Pull out the memory card.
CONNECTION AND PREPARATION
----
