40
DISHWASHER / USER INSTRUCTIONS
/51 EN
6
HOMEWHIZ
You can check your dishwasher and learn
about its status via your smart device with the
HomeWhiz function.
C
You can use your machine via
your smart device while the
HomeWhiz function is selected.
You can monitor your machine
through the application when the
function is not selected.
C
You can check if the HomeWhiz
function is enabled or disabled
by checking the function
indicator located on the key.
Function frame on the key will
be dim in cases where the
HomeWhiz function cannot be
enabled. For example, when the
wireless connection setting is off
or the door of the machine is
open.
C
The function will be disabled
when the door of the dishwasher
is open or when operations
regarding On/Off are
performed on the machine. It
can be enabled again with the
HomeWhiz key.
HomeWhiz Setup and User
Account Settings
Install the HomeWhiz application from the
application store of your smart device to use
the WLAN function of your machine.
Make sure that your smart device is
connected to the internet to use the
application.
If you are using the application for the first
time, complete the registration process with
your e-mail address on the application.
Once you've completed the registration
process, you can use all HomeWhiz-
supported appliances in your house through
this account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to see the
appliances paired with your account. You
can perform the user pairing processes of
these appliances from this page.
Initial setup
1 Tap "Add/Remove Appliance" section
on the HomeWhiz application.
2 Tap "Tap here to setup a new
appliance".
3. Press Function b key (see Section 5,
Operating the Appliance) to change
"HomeWhiz Setup: OFF" setting to ON
from the settings menu of the dishwasher.
Tap Next.
4. Then go to the settings of your smart
device and connect to "HomeWhiz-
Dishwasher-xxxx" network from Wi-Fi
networks. Password of the network can
be seen on the HomeWhiz application.
5. Connect your smart device to the
"HomeWhiz" network and return to
the HomeWhiz application. On the
application, you can see the dishwasher
you are adding. Tap Next to proceed to
the next step.
6. Select the network to which you want to
connect your dishwasher and enter the
password.
7. You can see
flashing while the
dishwasher gets connected to the
selected network, and remain on when
the connection is established.
8. Once your dishwasher is connected
to the selected network, you need to
connect to the same network on your
smart device. If your smart device does
