14
DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in water,
stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately, run
your machine empty in the
shortest program.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
A
Only use the detergents
produced particularly for use
with dishwashers in the machine.
We recommend you not to use
detergents that contain chlorine
and phosphate as they are
harmful for the environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
C
If your machine is equipped with
“Automatic Water Hardness
Detection System”, water
hardness adjustment will be
made by the service/user as
standard during first installation.
If you move your house, your
machine will automatically
perform water hardness level
adjustment according to the
water hardness in the new place
you have moved in.
C
Adjust the water softness
level according to the "Water
hardness level instruction"
supplied with your machine.
Adding salt
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.