4
Installation notes
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect
to a DC supply or any other power supply.
Locate the TV in the room where light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the
cabinet or premature component failure.
Do not cover the ventilation openings when using the TV.
Additional Safety notes
Never tamper with any components inside the TV, or any other
adjustment controls not mentioned in this manual.
All LCD TVs are high voltage instruments. When you clean up dust or
water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with a dry so ft cloth.
During thunder and lighting, unplug the power cord and antenna cord to
pre vent damage to your TV.
All repairs to this TV should only be performed by quali fied TV service
personnel.
