EN / 36
7.4 Cleaning the inside of the oven
(cooking area)
Follow the cleaning steps described in the
"General Cleaning Information" [
according to the surface types in your oven.
Cleaning the side walls of the oven
The side walls in the cooking area can only
be covered with enamel or catalytic walls. It
varies by model. If there is a catalytic wall,
refer to the “Catalytic surfaces” [
35] section
for information.
If your product is a wire shelf model, remove
the wire shelves before cleaning the side
walls. Then complete the cleaning as de-
scribed in the "General Cleaning Informa-
tion" [
34] section according to the side wall
surface type.
To remove the side wire shelves:
a. Remove the front of the wire shelf by
pulling it on the side wall in the opposite
direction.
b. Pull the wire shelf towards you to remove
it completely.
c. To reattach the shelves, the procedures
applied when removing them must be re-
peated from the end to the beginning, re-
spectively.
7.5 Cleaning the Oven Door
You can remove your oven door and door
glasses to clean them. How to remove the
doors and windows is explained in the sec-
tions
"Removing the oven door”
and
"Re-
moving the inner glasses of the door"
.
After removing the door inner glasses, clean
them using a dishwashing detergent, warm
water and a soft cloth or sponge and dry
them with a dry cloth. For lime residue that
may form on the oven glass, wipe the glass
with vinegar and rinse.
Do not use harsh abrasive cleaners,
metal scrapers, wire wool or bleach
materials to clean the oven door and
glass.
Removing the oven door
a. Open the oven door.
b. Open the clips in the front door hinge
socket on the right and left by pushing
them downwards as shown in the figure.
c. Hinge types vary as (A), (B), (C) types ac-
cording to the product model. The follow-
ing figures show how to open each type
of hinge.
d. (A) type hinge is available in normal door
types.
Illustration 1:
Hinges - closed position
Illustration 2:
Hinges - open position
