15
5.
Install the plug-in before viewing the live video and managing the network camera.
Please follow the installation prompts to install the plug-in.
Note:
You may have to close the web browser to finish the installation of the plug-in.
Figure 4-2
Download Plug-in
6.
Reopen the web browser after the installation of the plug-in and repeat the above
step 2 to step 4 to login.
Note:
For detailed instructions of further configuration, refer to the user manual of
network camera.
4.1
Initializing the Memory Card
Steps:
Check the memory card status by tapping on the Storage Status in the Device Settings
interface.
If the memory card status displays as uninitialized, tap to initialize it. The status will then
change to Normal. You can then start recording any event triggered video in the camera
such as motion detection.
WWW.GRUNDIG-SECURITY.COM
QG-GD-CI-AP2747P-2019-02-03-V3-EN ©ABETECHS GMBH, DÜSSELDORF, GERMANY