Grundig GCI-K1577TH, Руководство пользователя

Страница: 55 / 100

9.8.6. Manual trigger
In the Manual Trigger setting, the current image(s) or video(s) can be upload to the appointed destination, such as
an FTP site or an E-mail address. The administrator can specify the triggered actions that will take place when
the users switch the Manual Trigger button to <On>. All options are listed as follows.
Manual Trigger :
The default setting for the Manual Trigger function is <Off>. Enable the function by selecting <On>. After the
Manual Trigger function is enabled, click on the Manual Trigger button on the Home page to start uploading data.
Click again to stop uploading.
Triggered Action (Multi-option) :
The administrator can specify alarm actions that will take place at alarm occurrence. All options are listed as
follows.
Triggered Action (Multi-option) :
The administrator can specify alarm actions that will take place at alarm occurrence. All options are listed as
follows.
- Enable Alarm Output:
Select this item to enable the alarm relay outputs.
- IR Cut Filter:
Select the item and the IR cut filter (ICR) of the camera will be removed (on) or blocked (off) when an alarm is
triggered.
Note: The IR Function (Please refer to the section "IR Function") cannot be set as <Auto> mode if this trigger
action is enabled.
- Send Message by FTP:
The Administrator can choose to send an alarm message by FTP when an alarm is detected.
- Send Message by E-Mail:
The Administrator can choose to send an alarm message by E-Mail when an alarm is triggered.
53 English