Grundig GCA-C0245P, Руководство пользователя, Страница: 25 / 46

STEP 4:
Move the cursor to <EXIT> and press <CAMERA MENU to exit the password setting page.
If the OSD Password function is enabled and you press the <CAMERA MENU> key to enter the OSD menu, the
password request message will be displayed as shown below. Please enter the password, press <ENTER> to
access the OSD main menu.
NOTE: When you activate the Password Function for the first time, please enter first the following Master
Password to be allowed to setup the new password. The Master Password is: 9527.
OSD AUTO CLOSE:
Users can specify the duration during which the OSD menu stays on the screen. The time selection ranges from 5
to 30 seconds. To let the OSD menu stay on the screen, please set this option to “OFF”.
SYSTEM RESET:
Two types of system reset can be implemented under this item:
- SYSTEM RESET:
Select this function for system reboot. Press “ENTER” and the system reboot will start.
- DEFAULT SYSTEM:
This function allows users to restore the camera to its factory default state. Press “ENTER” to start the reset.
EXIT:
Exit the SETUP MENU 2 and go to MAIN PAGE 2 to set other functions.
5.3.9. ID DISPLAY
Users are allowed to choose whether the dome ID will be displayed on the monitor to identify each dome. For the
Dome Camera’s ID setting, please refer to 2.4. ID Configuration.
ON:
Display the ID of the selected dome at the right bottom of the monitor screen.
OFF:
Hide the ID of the selected dome.
23 English