Grundig GCA-B1005B, Руководство пользователя

Страница: 17 / 25

- SMART IR (AUTO, CENTER): Choose
CENTER if the subjects which can cause
overexposure are located near the centre of
the monitored area. Choose AUTO if the
subjects which can cause overexposure are
scattered on the monitored area.
- LEVEL (000 ~ 031): Sets the reference
level of the IR OPTIMIZER. If the value is
too high, the screen may be overexposed.
- ATR WD-EX (ON, OFF): The ATR WD-EX (Adaptive Tone Reproduction) function
provides gradation compensation to improve the contrast of subjects whose gradation
has been lost in cases where, for instance, both low-luminance areas and high-
luminance areas exist in the same picture.
The ATR WD-EX function improves the visibility of the entire picture by providing the
optimum gradation compensation for the image in one field based on the luminance
information.
If you choose CENTER for SMART IR in
the IR OPTIMIZER submenu, a submenu
will appear where you can adjust the
size/location of the IR OPT area.
- IR LED [OFF, FIX, DAY/NIGHT] :
This function is not available in this camera model.
- EXTON [OFF, ON] :
Here you can activate the EXTON function to activate the external Day & Night
connector on the rear panel of the camera. When ON is chosen, the connector is active
and the following submenu will appear where you can adjust the settings for the EXTON
function. Depending on the external device you are connecting to the camera for
controlling the Day/Night switching of the camera, you have to make the following
adjustments.
15 English