Grundig GCA-B1005B, Руководство пользователя

Страница: 16 / 25

BLC (Back Light Compensation) [-, ON, OFF]:
Please set first WDR to OFF, afterwards it is possible to adjust the BLC. BLC is used to
counterbalance the screen image by increasing the brightness so that a subject which
appears dark due to a strong backlight can be displayed in more detail.
6.8. DAY/NIGHT
This function is used to improve the camera's sensitivity at night or when the brigthness
level of the ambient environment is low.
AUTO [BURST, DELAY CNT,
DAY
→ NIGHT, NIGHT → DAY, IR OPT, IR
LED, EXTON] :
This mode automatically switches the video
signals between COLOR and B/W when the
according ambient illumination/brightness is
reached.
- BURST: Set this option to ON to output a burst signal in B/W mode.
- DELAY CNT: Sets the delay time for switching between COLOR and B/W mode.
- DAY
→ NIGHT: Sets the brightness level for switching from COLOR to B/W mode.
- NIGHT → DAY: Sets the brightness level for switching from B/W to COLOR mode.
ATTENTION:
The following functions IR OPT, IR LED and EXTON are only available for these
Cameras if you connect the external Day & Night connector to an LED board.
- IR OPT [OFF, ON] :
Set IR OPT (IR OPTIMIZER) to ON to control the screen overexposure caused by the
camera's bright LED light (optional) in dark ambient conditions. When choosing ON, the
following submenu will appear where you can adjust the settings for the IR OPTIMIZER.
14 English