Grundig DKR 3000, Руководство пользователя

Страница: 52 / 75

ENGLISH ­ ­52
WI-FI­NETWORK­–­FIRST­INSTALLATION
­-------------------
that you will need to switch the radio on manu-
ally in order to use any other remote control
software (like UNDOK app). if you want to re-
motely control the Kitchen Radio even when it
has been switched into standby.
- You can also choose to keep the network con-
nected by using the “Keep network connected”
option in the network settings menu.
- In the standby mode, the Wi-Fi signal indicator
is displayed with or without a cross through it
according to the chosen network settings.
11 You will then need to set “ Keep­ network­
connected? ”option.
12 Choose < YES > to activate this function (if
you will use the UNDOK app for remote con-
trol) or choose <
NO > to deactivate this func-
tion.
13 The Kitchen Radio will then start scanning for
available Wi-Fi networks.
- Display: < Network­wizard­Scanning / >
will appear. After completed
- Display: <
SSID
> list will appear for selection.
After network wizard scan is completed, the
name of your wireless network (SSID) will appear
on the screen together with all other available net-
works (SSID List).
14
Highlight the name of your wireless network in
the SSID list by scrolling up or down and go to
the next steps to make required inputs.
Note: If your Wi-Fi network is not found
in SSID list;
- then device may be too far from your Wi-Fi
router. Or;
- you may need to switch on your wireless router
(please see the instructions supplied with it).
Or;
- it may be because the router is configured not
to broadcast the SSID. You should then select
the <
Manual­config > option in order to en-
ter the network details manually.
- If your network name is being broadcast, and
it was not found, then try selecting the < Res-
can> option to scan again or try moving your
Kitchen Radio closer to your Wi-Fi router.
WPS­(Optional)
Note: WPS (Wi-Fi Protected Setup) encrypted
networks are identified by “[WPS]” shown in front
of the SSID, and have two methods of connection.
15
Select one and follow the prompts. When us-
ing the Network wizard an additional option <
Skip­WPS
> is available.
<­Push­Button­>
- If you select this option, the Kitchen Radio
prompts you to press the connect button on the
router and then press the »
OK « knob on de-
vice.
<­PIN­>
- If you select the option < PIN >, the Kitchen
Radio generates an 8-digit code number which
you should enter into the wireless router using a
web browser (refer to your router’s user docu-
mentation). You should then press the »
OK «
button on the Kitchen Radio.
<­Skip­WPS>
- Select < Skip­WPS > to skip WPS setup and
go directly to the <
Key
> menu to enter the
network password when your Wi-Fi router is a
standard encrypted network that does not sup-
port WPS.
Key­(Password)
16
After your Wi-Fi network is found by the de-
vice, the » Password­entry « screen will ap-
pear.
- if your network is using one of the encryption
systems: WEP, WPA/WPA2. You will need to
enter the correct encryption key (password)
into the Kitchen Radio to allow it to communi-