Grundig CUC 2058 D, Руководство по обслуживанию

Страница: 23 / 66

GRUNDIG Service 1 - 23
Allgemeiner Teil / General Section CUC 2058 D / 2059 D
58
SPECIAL SETTINGS
________________________________________________________
Limiting the analogue channel position selection
The ATS search saves all channels it has found and automatically “locks” the first
position to which no channel is assigned.
In this way, when channel positions are selected step by step using the »
, ,
« or
» . . « button, only channels which have been found can be selected.
You may also enter this limit manually, in the following example the “lock” has
been activated as of channel position 6.
1
Call up the »ANALOGUE DIALOGUE CENTRE« by pressing »
i
« and then
» OK «.
– The »ANALOGUE DIALOGUE CENTRE« appears on the picture screen.
2
Select the »MANUAL TUNING« row from the »DIALOGUE CENTRE« with
»
, , « or » . . « then confirm with »
OK
«.
3
Select the channel position (6 in the example) with »
F F
« or »
E E
« or the but-
tons
»
1...0
«.
4
Select the »C/S« row with »
, ,
« or »
. .
« then press »
F F
« or »
E E
« to sel-
ect the »Channel« option.
5
Select the »Channel« row with » , , « or » . . « then use the buttons
»
1...0
«
to enter »00«.
6
Save the setting with »
OK
«.
7
Press » TXT « to end the setting.
Note:
– Now only the first 5 channel positions (and the »AV« positions) can be
selected in rapid sequence with the » , , « or » . . « button.
– All single digit channel positions – as well as the “blocked” – can further
be selected using the buttons
»
1...0
«
.
All channel positions can be selected using the buttons
»
1...0
«
if channel
position 11 is blocked.
ANALOGUE MANUAL TUNING
6
OK Memorize 0-9 TXT
i
––––––––––
u
Program
r
06
e
C/S Channel
Channel C 44
Finetun. 00
Standard automatic
ANALOGUE MANUAL TUNING
6
OK Memorize 0-9
■
Tune TXT
i
––––––––––
u
Program 06
C/S Channel
Channel
r
00
e
Finetun. 00
Standard automatic
ENGLISH
59
SPECIAL SETTINGS
____________________________________________________________________
Programming analogue TV channels manually
This setting is only required if, for example, a cable provider adds a new
channel and you wish to keep your favourite channel order.
1
»Call up the »ANALOGUE DIALOGUE CENTRE« by pressing »
i
« and then
»
OK
«.
– The »ANALOGUE DIALOGUE CENTRE« appears on the picture screen.
2
Select the »ANALOGUE MANUAL TUNING« row from the »ANALOGUE
DIALOGUE CENTRE« with »
, ,
« or »
. .
« then confirm with » OK «.
3
Select the channel position with »
F F
« or »
E E
« or the buttons
»
1...0
«
4
Select the »C/S« row with »
, ,
« or »
. .
« then use »
F F
« or »
E E
« to select
the »Channel« or »Special Channel« option.
5
Select the »Channel« row with »
, ,
« or »
. .
« then use »
F F
« or »
E E
« or
the buttons »
1...0
« and enter the desired channel number.
6
Select the »Standard« row with »
, ,
« or »
. .
« then use »
F F
« or »
E E
« to
select the standard required.
7
Fine-tune the picture if necessary. For this, select the »Finetun.« row with
»
, , « or » . . « then use » F F « or » E E « to alter the finetuning.
8
Save the setting with »
OK
«.
Note:
To programme further channels, repeat the steps
3
to
8
.
9
Press » TXT « to end the setting.
ANALOGUE MANUAL TUNING
6 OK Memorize 0-9 TXT
i
––––––––––
u
Program
r
06
e
C/S Channel
Channel C 44
Finetun. 00
Standard automatic
ANALOGUE MANUAL TUNING
6
OK Memorize 0-9
■
Tune TXT
i
––––––––––
u
Program 06
C/S Channel
Channel
r
C 26
e
Finetun. 00
Standard automatic
ANALOGUE MANUAL TUNING
6
OK Memorize TXT
i
––––––––––
u
Program 06
C/S Channel
Channel C 26
Finetun.
r
00
e
Standard automatic