1 - 12
GRUNDIG Service
Allgemeiner Teil / General Section
CUC 2058 D / 2059 D
ENGLISH
13
CONNECTION AND PREPARATION
_______________
Connecting the aerial, a video recorder,
a satellite receiver
Connecting the aerial to the TV set
1
Connect the cable from the house aerial with the »
ANTENNA IN
«
socket on the TV set.
2
Connect the aerial cable supplied with the »
ANTENNA LOOP OUT
«
socket and the »
ANTENNA LOOP IN
« socket on the TV set.
Note:
When receiving stations in band 1 (45 MHz - 62 MHz) or in band 3
(175 MHz - 225 MHz), it is necessary to connect a frequency filtre in front of
the aerial input »
ANTENNA IN
« (Ask your GRUNDIG Dealer).
AV1
AV2
ANTENNA
LOOP IN
L
R
S
ANTENNA
LOOP OUT
ANTENNA IN
LINE
SERIAL
PORT
CI1 CI2
TV
R
SAT
ENGLISH
19
SETTINGS
______________________________________________________________________________
Channel programming
The TV set is equipped with an automatic tuning system for analogue and digital
TV channels. The tuning can take approx. 15 minutes.
When the set is first powerd up and you start the automatic tuning system the TV
set searches at first for digital TV channels and then for analogue TV channels.
99 channel positions for digital TV channels (services) and 99 channel positions
for analogue TV channels are available.
When the automatic search is completed, you may sort the channels in a
sequence of your choice for digital and then for analogue channels. Mixing is
not possible.
You may delete TV channels which have been found several times, or those with
poor reception quality, from the TV programme charts.
Programming digital and analogue TV channels
using the automatic tuning system
1
Switch the TV set on by pressing »
IO
« on the TV set.
– The »AUTOMATIC TUNING SYSTEM« screen appears.
2
Start the search with »
OK
«.
– The TV set searches at first for digital TV channels and then for analogue
TV channels. Depending on the number of channels which can be recei-
ved, the search can take some time.
– When the search is completed, the TV set switches to channel position 1
and the »DIGITAL PROGRAM SORT« screen appears.
AUTOMATIC TUNING SYSTEM
OK Start Digital Automatic Tuning System TXT
Prog UHF
Signal
Service Found
Progress
