1 - 22
GRUNDIG Service
Allgemeiner Teil / General Section
CUC 2058 D / 2059 D
56
Connecting the TV set to a telephone socket
1
Connect the »
ü
LINE
« socket on the TV set (RJ11 plug) and the telepho-
ne adapter (431A plug) with a commercially available modem cable (with
ferrite-clip).
2
Connect the telephone lead with the second socket on the telephone
adapter.
3
Plug the telephone adapter into the telephone socket.
Note:
When using a cable without ferrite clip, this must be retrofitted. When doing
this, one winding must be inserted through the clip. This clip is available from
your Grundig dealer.
MODEM FUNCTIONS
________________________________________________________________
AV1
AV2
ANTENNA
LOOP IN
L
R
S
ANTENNA
LOOP OUT
ANTENNA IN
LINE
SERIAL
PORT
CI1 CI2
1
2
3
0
4
5
6
7
8
9
R 2
R 1
–
+
ENGLISH
57
Settings for modem operation
With this setting you determine
– the dialling mode.
This requires you to inform the modem of what type of phone line you use
(pulse or tone dialling). Pick up and listen to the sound coming from your
phone during dailing. If it is continuous, then you must select ”TONE”, if it is
intermittent, then you must select ”PULSE”
– the dialling prefix and prefix number.
The TV set may be operated in a place where its use and viewing is commu-
nal, for example in offices, schools or shops. If this is the case, the prefix
needs to be enabled. This is done by selecting the ”ENABLE” setting. In addi-
tion, the prefix number (0 to 9) needs to be adjusted to accommodate that of
the normal phonelines of the office, school or shop.
If the TV set is used at home, this setting is not required.
1
Call up the »DIGITAL DIALOGUE CENTRE« by pressing »
i
« and then
»
OK
«.
2
Select the »CONFIGURATION« row with »
,
,
« or »
.
.
« then confirm with
»
OK
«.
3
Select the »MODEM SETUP« row from the »CONFIGURATION« menu with
»
,
,
« or »
.
.
« then confirm with »
OK
«.
– The »MODEM SETUP« menu appears on the picture screen, the
»DIALLING MODE« row is highlighted.
4
Select your dialling mode with »
F
F
« or »
E
E
« :»PULSE« or »TONE«.
5
Select the »DIALLING PREFIX« row with »
,
,
« or »
.
.
« then use »
F
F
« or
»
E
E
« to select the »ENABLE« setting.
6
Select the »PREFIX NUMBER« row with »
,
,
« or »
.
.
« then use the
»
1 ... 0
«
buttons to enter the prefix number (0 to 9).
7
Press »
TXT
« to end the setting.
MODEM FUNCTIONS
________________________________________________________________
DIGITAL DIALOGUE CENTRE
OK
■
Analogue
TXT
i
–––––––––––––––––––––––––––
u
SLEEP TIMER
RECORD TIMER
PARENTAL LOCK
PARENTAL CHANNEL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
CONFIGURATION
COMMON INTERFACE
MODEM SETUP
6
Back
TXT
i
––––––––––––
u
DIALLING MODE
r
TONE
e
DIALLING PREFIX
DISABLE
PREFIX NUMBER
0
9
