Grundig Cosmopolit 9 WEB DAB Plus, Инструкция по эксплуатации

Страница: 26 / 37

ENGLISH
26­
CONNECTION­AND­PREPARATION
­---------------------------------------
Connecting­an­external­device
Note:
7
Switch the device off before you connect
external devices.
1 Use standard audio cables to connect the
audio outputs of the external device to the
» AUX­IN « socket on the device.
Connecting­an­MP3­player­or­a­
USB­memory­stick
The device supports most MP3 Players or USB
memory sticks.
Caution:
7
The device must be switched off while the
USB connection is being made. If it is not
switched off, data can be lost.
1 Connect the USB interface of the MP3 player
to the » USB « (type A) socket on the device
using a standard USB cable;
or
insert the USB plug of the USB memory stick in
the USB socket » USB « (type A) on the device.
Notes:
7
To remove the MP3 player or the USB mem-
ory stick, switch off the device and pull out
the cable for the data medium.
7
The USB socket on the device does not sup-
port a connection for a USB extension cable
and is not designed for directly connecting
to a computer.
Connecting­the­headphones
1 Insert the headphone plug (3.5 mm) into the
» U « socket on the device.
– The loudspeaker of the device is switched
off.
Caution:
7
Excessive volume levels when using head-
phones or earphonescan damage your
hearing.
Connecting­the­mains­adapter
Notes:­
7
Check that the mains voltage on the type
plate (on the mains adapter) corresponds
to your local mains supply. If this is not the
case, contact your specialist dealer.
7
Before connecting the power adapter plug
to the wall socket, ensure that all other con-
nections have been made.
1 Insert the plug of the mains adapter cable into
the »
DC­9V­IN
« socket.
2 Plug the power adapter into an electrical out-
let.
Caution:
7
The device is connected to the mains with
the power supply unit. Unplug the mains
adapter to completely disconnect the de-
vice from the mains.
Inserting­battery­in­the­remote­
control
1 Pull off the film from the battery.
2
Take off the battery compartment cover (screw
cap).
3­ When inserting the battery (3 V, lithium, CR
2025), make sure the positive terminal (+) is
facing upwards and the buttons on the remote
control are facing downwards.
4
Replace the battery compartment cover
(screw cap) and fasten it.
Notes:­
7
Do not expose the battery to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
7
If the device no longer reacts properly to
remote control commands, the battery may
be flat. Always remove used batteries. The
manufacturer accepts no liability for dam-
age caused by leaking batteries.
Environmental­note:
7
Batteries, including those which contain no
heavy metal, should not be disposed of with
household waste. Always dispose of used
batteries in accordance with local environ-
mental regulations.