8 ENGLISH
2
Observe the polarity marked on
the base of the battery compart-
ment when inserting the batteries
(2 x 1.5 V LR 03/AM 4/AAA).
3
Insert the lid again and press it
down until it latches in place.
Notes:
7
Do not expose the batteries to
extreme heat, caused for exam-
ple by direct sunlight, heaters or
fire.
7
Remove the batteries when they
are flat or when you know that
the device will not be used for a
long period of time. The manu-
facturer accepts no liability for
damage caused by leaking bat-
teries.
Environmental note:
7
Batteries, including those which
do not contain heavy metal,
should not be disposed of with
household waste.
Always dispose of used batter-
ies in accordance with local
environmental regulations.
Mains operation
Check that the mains voltage on the
type plate (on the bottom of the ap-
pliance) corresponds to your local
mains supply. If this is not the case,
contact your specialist dealer.
1
Plug the power cord into the wall
socket (230V~, 50/60 Hz).
Caution:
7
The device is connected to the
mains with the power cord. Pull
out the power plug when you
want to completely disconnect
the device from the mains.
7
Unplug the mains plug to dis-
connect the device from the
mains. Make sure the power
plug is easily accessible during
operation and not hindered by
other objects.
Inserting the back-up
batteries
During mains operation, the back-up
batteries ensure that stored settings
are not lost in the case of a power
failure or when the device is briefly
disconnected from the mains.
1
Open the battery compartment
underneath the device by press-
ing the marked catch and remov-
ing the lid.
POWER SUPPLY
________________________________
