[UK]
TIME SETTING
1. Press and hold MODE for 3 seconds until the year value starts flashing on the display. Then press UP or DOWN
to set the year.
2. Press MODE again. The month value will start flashing on the display. Then press UP or DOWN to set the month.
3. Repeat step 2 to set the day, 12/24 format, offset, hour and minute in sequence.
ALARM SETTING
1. Press MODE once to enter alarm mode, then press MODE for 3 seconds to begin setting the alarm time. Press
MODE to select the hours, minutes and snooze duration in sequence, pressing UP or DOWN to adjust the value.
Press MODE to confirm.
2. In alarm mode, press UP to turn the alarm on or off, as indicated by .
3. Alarm (2 minutes):
A) 0-10 seconds, BI (once per second)
B) 10-20 seconds, BI BI (twice per second)
C) 20-30 seconds, BI BI BI BI (four times per second)
D) After 30 seconds BI (continuously).
4. When the alarm comes on, press SNOOZE to postpone it, or press any other button to turn it off.
5. The default snooze duration is 5 minutes. You can select a value between 1 and 20 minutes.
RF FUNCTION
1. When the batteries are inserted, the product enters RF receiving mode for 3 minutes.
2. In normal display mode, briefly press UP to change RF channel (CH1, CH2, CH3).
3. In normal display mode, press UP for 3 seconds to manually enter RF receiving mode (as indicated by the
flashing number). RF receiving mode will exit automatically if no signal is received within 3 minutes. (Note: The
clock
’
s channel should be the same as the transmitter).
RC FUNCTION
1. When the batteries are inserted, the product automatically starts receiving the RC signal.
2. While the RC signal is being received, you can press and hold the DOWN button to stop it.
Weather Forecast
Icons for weather conditions: Sunny –
Patchy sun –
Cloudy –
Rainy
Humidity
＜
40%: COMFORT LEVEL will display
‘
Dry
’
Humidity between 40%-70% and temperature 20-28 : COMFORT LEVEL will display
‘
Comfort
’
Humidity
＞
70%: COMFORT LEVEL will display
‘
Wet
’
Temperature range:
Indoors 0-50
(32-122 )
Outdoors -40-70
(-40-158 )
Humidity range: 20%~ 95%.
Other functions:
1. Briefly press the DOWN button to toggle between
and .
2. Press MAX/MIN to show the max./min. temperature and humidity recorded. Press and hold MAX/MIN for 3 seconds
to clear the record.
