Grundig 43 VLE 5523 BN, Инструкция пользователя

Страница: 42 / 82

ENGLISH
42­
USB­OPERATION
­--------------------------------------------------------------------------------------------
­Connecting­external­data­media­
Before connecting the external data medium it is
recommended to switch the television to stand-
by mode.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
7
The USB1 socket of the television set
supplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
USB2 of the television set.
7
If you use a network cable for external hard
disks which are connected to the
USB2
socket on the television, this network cable
must also be disconnected from the power
supply when the television is switched off.
7
External data media may not be discon-
nected from the television set while files on
the data medium are being accessed.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not in itself an operating
mode. It is only an additional function.
AV / S-VHS
SERVICE
SATELLITE
13/18V
max. 500mA
ANT-IN
5V
max. 50mA
Optic Out USB2 HDMI2
1­ Press » 8 «, » 1…0 « or » P+ « or » P- « to
switch on the television from standby mode.
2­ Connect the USB2 socket of the television
and the corresponding socket on the data
device (external hard drive, digital camera,
card reader or MP3 player) using a USB
cable;
or
insert the USB plug of the USB memory stick
into the USB1 socket of the television set.
­Removing­the­external­data­me-
dia
Before removing the external data medium, log
off the data medium.
1­ Switch off the media player by pressing
» My­Media «.
2­
Open the menu with »
MENU
«.
3­
Select the menu item »USB RECORDING«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
4­ Select the line »Safely Remove Disk« with
»
V
« or »
Λ
« and press » OK « to confirm.
Note:
7
The data medium can now be removed
from the socket.